Download Datasheets TC1428 Device 
Download datasheets and other technical documentation for microcontrollers - download datasheets and technical documentation for microcontrollers

PICmicro Microcontrollers
PICmicro flexible microcontroller solutions provide results!

Analog & Interface Products
A broad spectrum of analog products with a focus on power management, thermal management, linear and mixed-signal solutions

KEELOQ Authentication Products
KEELOQ is a patented code-hopping technology

Memory Products
A broadest selections of memory devices on the market for embedded control applications

microID RFID Products
Radio Frequency Identification Tags (RFID)
rfPIC Microcontrollers
New UHF radio frequency 8-bit microcontrollers

Home - Analog & Interface Products - Power Management - Power MOSFET Drivers - TC1428 Device, download datasheet

Download Datasheets TC1428 Device

The TC1426/27/28 are a family of 1.2A dual high- speed drivers. CMOS fabrication is used for low power consumption and high efficiency. These devices are fabricated using an epitaxial layer to effectively short out the intrinsic parasitic transistor responsible for CMOS latch-up. They incorporate a number of other design and process refinements to increase their long-term reliability. The TC1426 is compatible with the bipolar DS0026, but only draws 1/5 of the quiescent current. The TC1426/27/28 are also compatible with the TC426/27/28, but with 1.2A peak output current rather than the 1.5A of the TC426/27/28 devices. Other compatible drivers are the TC4426/27/28 and the TC4426A/27A/28A. The TC4426/27/28 have the added feature that the inputs can withstand negative voltage up to 5V with diode protection circuits. The TC4426A/27A/28A have matched input to output leading edge and falling edge delays, tD1 and tD2, for processing short duration pulses in the 25 nanoseconds range. All of the above drivers are pin compatible. The high-input impedance TC1426/27/28 drivers are CMOS/TTL input-compatible, do not require the speed-up needed by the bipolar devices, and can be directly driven by most PWM ICs. This family of devices is available in inverting and non-inverting versions. Specifications have been optimized to achieve low-cost and high-performance devices,well-suited for the high-volume manufacturer.

Datasheet and Other Documentation

Detailed Content

Lit. Number



TC1426/27/28 Datasheet


Download TC1426/27/28 Datasheet


In Production

Specification Chart


Peak Output Current (A)

Output Resistance (Ohms)

Maximum Supply Voltage (V)

Input/Output Delay (tD1, tD2) (ns)

Dual, Inverting and Non-inverting





Additional Features

Latch-Up Protected: Will Withstand
500 mA Reverse Output Current
ESD Protected: 2 kV
High Capacitive Load Drive Capability: 1000pF in 38nsec
Wide Operating Range: 4.5V to 16V
Low Delay Time: 75nsec Max
Logic Input Threshold Independent of Supply Voltage
Output Voltage Swing to Within 25mV of Ground or V DD
Low Output Impedance: 8

Package Options

8 PDIP(P), 8 SOIC(S), 2008-2015 - download datasheets