Download Datasheets TC4403 Device 
Download datasheets and other technical documentation for microcontrollers

Chip-Review.com - download datasheets and technical documentation for microcontrollers


PICmicro Microcontrollers
PICmicro flexible microcontroller solutions provide results!

Analog & Interface Products
A broad spectrum of analog products with a focus on power management, thermal management, linear and mixed-signal solutions

KEELOQ Authentication Products
KEELOQ is a patented code-hopping technology

Memory Products
A broadest selections of memory devices on the market for embedded control applications

microID RFID Products
Radio Frequency Identification Tags (RFID)
rfPIC Microcontrollers
New UHF radio frequency 8-bit microcontrollers

Home - Analog & Interface Products - Power Management - Power MOSFET Drivers - TC4403 Device, download datasheet

Download Datasheets TC4403 Device


The TC4403 is a modified version of the TC4425 driver, intended to drive floating or isolated loads requiring high-current pulses. The load is intended to be connected between the outputs without other reference to supply or ground. Then, only when both logic inputs and the VDD input are energized, is power supplied to the load. This construction allows the implementation of a wide variety of redundant input controllers. The low OFF-state output leakage and independence of the two half-circuits permit a wide variety of testing schemes to be utilized to assure functionality. The high peak current capability, short internal delays, and fast output rise and fall times ensure that sufficient power will be available to the load when it is needed. The TTL and CMOS compatible inputs allow operation from a wide variety of input devices. The ability to swing the inputs negative without affecting device performance allows negative biases to be placed on the inputs for greater safety. In addition, the capacitive nature of the inputs allows the use of series resistors on the inputs for extra noise suppression. The TC4403 is built for outstanding ruggedness and reliability in harsh applications. Input voltage excursions above the supply voltage or below ground are clamped internally without damaging the device. The output stages are power MOSFETs with high-speed body diodes to prevent damage to the driver from inductive kickbacks.

Datasheet and Other Documentation

Detailed Content

Lit. Number

Download

 

TC4403 Datasheet

21417a

Download TC4403 Datasheet

Status

In Production

Specification Chart

Configuration

Peak Output Current (A)

Output Resistance (Ohms)

Maximum Supply Voltage (V)

Input/Output Delay (tD1, tD2) (ns)

Single, Non-inverting, Floating, Load Driver

3

5/5

18

33/38

Additional Features

Low Quiescent Current: 300 A Max
Capacitive Inputs With 300mV Hysteresis
Both Inputs Must Be Driven to Drive Load
Low Output Leakage
High Peak Current Capability
Fast Output Rise Time
Outputs Individually Testable

Package Options

8 PDIP(P)



Chip-Review.com, 2008-2015
Chip-Review.com - download datasheets