PICmicro Microcontrollers PICmicro flexible microcontroller solutions provide results!
Analog & Interface Products A broad spectrum of analog products with a focus on power management, thermal management, linear and mixed-signal solutions
KEELOQ Authentication Products KEELOQ is a patented code-hopping technology
Memory Products A broadest selections of memory devices on the market for embedded control applications
microID RFID Products Radio Frequency Identification Tags (RFID)
rfPIC Microcontrollers New UHF radio frequency 8-bit microcontrollers
|
Home - Analog & Interface Products - Power Management - Power MOSFET Drivers - TC4424 Device, download datasheet
Download Datasheets TC4424 Device |
The TC4423/4424/4425 are higher output current versions of the new TC4426/4427/4428 buffer/drivers, which, in turn, are improved versions of the earlier TC426/427/428 series. All three families are pin-compatible. The TC4423/4424/4425 drivers are capable of giving reliable service in far more demanding electrical environments than their antecedents. Although primarily intended for driving power MOSFETs, the TC4423/4424/4425 drivers are equally well-suited to driving any other load (capacitive, resistive, or inductive) which requires a low impedance driver capable of high peak currents and fast switching times. For example, heavily loaded clock lines, coaxial cables, or piezoelectric transducers can all be driven from the TC4423/4424/4425. The only known limitation on loading is the total power dissipated in the driver must be kept within the maximum power dissipation limits of the package.
Datasheet and Other Documentation |
|
|
|
|
Specification Chart
Configuration |
Peak Output Current (A) |
Output Resistance (Ohms) |
Maximum Supply Voltage (V) |
Input/Output Delay (tD1, tD2) (ns) |
Dual, Non-inverting |
3 |
5/5 |
18 |
33/38 |
|
Additional Features |
Wide Operating Range: 4.5V to 18V
High Capacitive Load Drive Capability: 1800pF in 25nsec
Short Delay Times: <40nsec Typ
Matched Rise/Fall Times
Low Supply Current
With Logic 1 Input 3.5mA
With Logic 0 Input 350 µA
Low Output Impedance: 3.5 ? Typ
Latch-Up Protected: Will Withstand 1.5A Reverse Current
Logic Input Will Withstand Negative Swing Up to 5V
ESD Protected: 4kV
Pinouts Same as TC1426/27/28;TC4426/27/28
|
|
|
Package Options |
8 PDIP(P), 16 SOIC(W)(SW) |
 |