Download Datasheets TC4428 Device 
Download datasheets and other technical documentation for microcontrollers

Chip-Review.com - download datasheets and technical documentation for microcontrollers


PICmicro Microcontrollers
PICmicro flexible microcontroller solutions provide results!

Analog & Interface Products
A broad spectrum of analog products with a focus on power management, thermal management, linear and mixed-signal solutions

KEELOQ Authentication Products
KEELOQ is a patented code-hopping technology

Memory Products
A broadest selections of memory devices on the market for embedded control applications

microID RFID Products
Radio Frequency Identification Tags (RFID)
rfPIC Microcontrollers
New UHF radio frequency 8-bit microcontrollers

Home - Analog & Interface Products - Power Management - Power MOSFET Drivers - TC4428 Device, download datasheet

Download Datasheets TC4428 Device


The TC4426/4427/4428 are improved versions of the earlier TC426/427/428 family of buffer/drivers (with which they are pin compatible). They will not latch up under any conditions within their power and voltage ratings. They are not subject to damage when up to 5V of noise spiking (of either polarity) occurs on the ground pin. They can accept, without damage or logic upset, up to 500 mA of reverse current (of either polarity) being forced back into their outputs. All terminals are fully protected against up to 4kV of electrostatic discharge. As MOSFET drivers, the TC4426/4427/4428 can easily switch 1000pF gate capacitances in under 30nsec, and provide low enough impedances in both the ON and OFF states to ensure the MOSFET's intended state will not be affected, even by large transients. Other compatible drivers are the TC4426A/27A/28A. These drivers have matched input to output leading edge and falling edge delays, tD1 and tD2, for processing short duration pulses in the 25 nsec range. They are pin compatible with the TC4426/27/28.

Datasheet and Other Documentation

Detailed Content

Lit. Number

Download

 

TC4426/27/28 Datasheet

21422a

Download TC4426/27/28 Datasheet

Status

In Production

Specification Chart

Configuration

Peak Output Current (A)

Output Resistance (Ohms)

Maximum Supply Voltage (V)

Input/Output Delay (tD1, tD2) (ns)

Dual, Inverting and Non-inverting

1.5

10/10

18

20/40

Additional Features

Wide Operating Range: 4.5V to 18V
High Capacitive Load Drive Capability: 1000pF in 25nsec
Short Delay Times: <40nsec Typ
Consistent Delay Times With Changes in Supply Voltage
Low Supply Current
With Logic ""1"Input...............4mA
With Logic ""0"Input...............400 A
Low Output Impedance: 7 Typ
Latch-Up Protected: Will Withstand >0.5A
Reverse Current, Down to 5V
Input Will Withstand Negative Inputs
ESD Protected: 4kV
Pinouts Same as TC426/27/28

Package Options

8 PDIP(P), 8 SOIC(S)



Chip-Review.com, 2008-2015
Chip-Review.com - download datasheets