Download Datasheets TC7107 Device 
Download datasheets and other technical documentation for microcontrollers - download datasheets and technical documentation for microcontrollers

PICmicro Microcontrollers
PICmicro flexible microcontroller solutions provide results!

Analog & Interface Products
A broad spectrum of analog products with a focus on power management, thermal management, linear and mixed-signal solutions

KEELOQ Authentication Products
KEELOQ is a patented code-hopping technology

Memory Products
A broadest selections of memory devices on the market for embedded control applications

microID RFID Products
Radio Frequency Identification Tags (RFID)
rfPIC Microcontrollers
New UHF radio frequency 8-bit microcontrollers

Home - Analog & Interface Products - Mixed Signal Devices - Display A/D Converters - TC7107 Device, download datasheet

Download Datasheets TC7107 Device

The TC7106A and TC7107A 3-1/2 digit direct-display drive analog-to-digital converters allow existing 7106/7107 based systems to be upgraded. Each device has a precision reference with a 20ppm/C max temperature coefficient. This represents a 4 to 7 times improvement over similar 3-1/2 digit converters. Existing 7106 and 7107 based systems may be upgraded without changing external passive component values. The TC7107A drives common anode light emitting diode (LED) displays directly with 8mA per segment. A low-cost, high-resolution indicating meter requires only a display, four resistors, and four capacitors. The TC7106A low power drain and 9V battery operation make it suitable for portable applications. The TC7106A/TC7107A reduces linearity error to less than 1 count. Rollover error the difference in readings for equal magnitude but opposite polarity input signals is below 1 count. High impedance differential inputs offer 1pA leakage current and a 10 12 ? input impedance. The differential reference input allows ratiometric measurements for ohms or bridge transducer measurements. The 15VPP noise performance guarantees a "rock solid" reading. The auto-zero cycle guarantees a zero display reading with a zero-volts input.

Datasheet and Other Documentation

Detailed Content

Lit. Number



TC7106/107/106A/107A Datasheet


Download TC7106/107/106A/107A Datasheet


In Production

Specification Chart

Display Type

Supply Voltage (V)

Resolution (Digits)

Resolution (Counts)

Power (mW)



3 1/2



Additional Features

Internal Reference with Low Temperature Drift
TC7106/7 80ppm/C Typical
TC7106A/7A 20ppm/C Typical
Drives LCD (TC7106) or LED (TC7107) Display Directly
Guaranteed Zero Reading With Zero Input
Low Noise for Stable Display
Auto-Zero Cycle Eliminates Need for Zero Adjustment
True Polarity Indication for Precision Null Applications
Convenient 9 V Battery Operation (TC7106A)
High Impedance CMOS Differential Inputs 10 12
Differential Reference Inputs Simplify
Ratiometric Measurements
Low Power Operation: 10mW

Package Options

40 PDIP(P), 44 PLCC(L), 44 PQFP(QF), 40 CERDIP(JW), 2008-2015 - download datasheets